![]() ![]()
Step 15) Next, from the Comms menu select System Comms: Step 14) Now open either RSLogix Micro or RSLogix 500, and then open your program file: ![]() Step 13) Now double click on your new driver in the RSWho window and after a few seconds you should see your Micro appear: Step 12) Here, add the Ethernet address of your MicroLogix (see notes above Step 1 for that procedure) and then click on OK: Step 11) As before, select the driver, click Add New, and then click Ok: Step 10) If after ten seconds of browsing RSLinx does not find your MicroLogix, you may wish to try adding it manually by adding the Ethernet Devices driver under Communications, Configure Drivers, Available Driver Types: Step 9) Next, double click on your new driver in the RSWho window as shown below: RSLINX CLASSIC DOWNLOAD FREE DRIVERSStep 8) And click on Close to close the Configure Drivers window: Step 7) Now click on OK to close the driver window: Beware not to choose WiFi or Bluetooth network cards if your MicroLogix is not connected to them: ![]() Step 6) Now select the Ethernet Port on your PC to which your MicroLogix is connected. Step 5) And accept the default name by clicking on OK: Step 3) Now from the Available Driver Types drop down list select the Ethernet/IP driver, a driver which will attempt to automatically find your MicroLogix on Ethernet: Step 2) Next launch RSLinx Classic, and then under the Communications menu select Configure Drivers: Ping 192.168.1.10) as explained in this article.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |